Explanation
Parameter
a newer version of Gateway software to the modem, the newer
version number is displayed.
The satellite modem address. The default modem address is
192.168.0.1. A different modem address can be configured.
LAN1 IP Address
Range of addresses available to the satellite modem.
LAN1 Subnet Mask
MAC address for the satellite modem.
LAN1 MAC Address
Address available for a second LAN connection.
LAN2 IP Address
Subnet mask (range of available addresses) available for a second
LAN connection.
LAN2 Subnet Mask
MAC address a second LAN connection.
LAN2 MAC Address
The Internet routable public IP address assigned to the modem.
NAT translates this address to local private addresses in the range
NAT IP Address
192.168.0.
x
that can be used by the devices on your local network
(where
x
= 0–9).
The NAT subnet mask (range of available addresses) assigned to
the modem is always 255.255.255.255.
NAT Subnet mask
Port Forwarding Configuration page
Note: The Port Forwarding Configuration page and link are present on your HN9200
only if they have been enabled by the NOC.
The Port Forwarding Configuration page and the link to it are present only if port forwarding
has been enabled and made visible on the modem by the NOC.
On this page you can define rules for allowing TCP and UDP traffic on the Internet to access
servers on your network.
Figure 20: Port Forwarding Configuration page
23
HN9200 Satellite Modem User Guide
1038623-0001 Revision B
Chapter 2
System Control Center
