800000 rev K
Huge Media Vault - Dual Max User’s Guide
Page 9 of 26
SCSI ID
The SCSI ID selection switches are located in the rear of the unit.
The Huge Media Vault has two separate RAID controllers. Each controller is independent of the other.
Each controller’s ID must be set accordingly.
Side B Side A
SCSI
ID
Mode
Select
SCSI
ID
Mode
Select
0 to 15
0 to 15
Each SCSI device attached to a SCSI channel must have it’s own unique ID setting. Valid ID for Wide
SCSI are from 0 to 15. Most SCSI host adapters inside your computer typically occupies ID 7. If there are
other SCSI devices on the SCSI channel, ensure that there are no SCSI ID conflicts.
If you are unsure which ID to use and the Huge Media Vault is the only device attached to this particular
channel of the host adapter, ID 0 can be used.
The Huge Media Vault must be turned off and back on again to make a new SCSI ID setting take effect.
Mode Select – RAID Level
The Mode Select switch is located in the rear of the unit.
The Huge Media Vault has two separate RAID controllers. Each controller is independent of the other.
Each controller’s Mode Select must be set accordingly.
Side B Side A
SCSI
ID
Mode
Select
SCSI
ID
Mode
Select
0
to
7 0
to
7
Mode Select is a unique feature of Huge Systems and it is a convenient way to select the desired operating
mode of the unit. No need of complicated software and serial port configuration procedures.