800000 rev K
Huge Media Vault - Dual Max User’s Guide
Page 19 of 26
Fig. 9 Select your RAID scheme,
give the RAID set a name, if the
disk set is not highlighted, highlight
the set and click on the
Create
button.
A warning message might pop up.
It reports “the RAID set is not
functioning properly. Some disks
may be damaged or missing. “
There is nothing wrong, just click
OK and wait a few seconds for the
system to catch up.
Fig. 10 You should now see your
named volume as show on the left
hand side of the screen.
Congratulations! You have
successfully prepared your disks
utilizing the “Bart Process”.