
800000 rev K
Huge Media Vault - Dual Max User’s Guide
Page 11 of 26
Reset Button
The Reset Buttons are located below the SCSI ID and Mode Select switch quadrant.
SCSI ID / Mode Select
⊗
⊗
Reset Reset
Side B Side A
The Reset Button is used in conjunction with the Mode Select option. See the Mode Select section.
SCSI connections
The Huge Media Vault has two RAID controllers (Side A and Side B), each controller has a pair of SCSI
68-pin high density connectors. They function as an IN and an OUT connection with internal loop-through
for the SCSI channel. This SCSI channel is compatible with Ultra160 (LVD) at 160 MBytes/sec, Ultra2
(LVD) at 80MBytes/sec, and other SCSI standards. HVD (High Voltage Differential) is not supported.
Side B
Side A
SCSI IN
SCSI IN
SCSI OUT
SCSI OUT
Host connections
Use two Ultra160 rated SCSI cables to connect the two SCSI channels to your host computer. Connect the
Side A SCSI IN to the 1
st
SCSI channel in the computer, and connect the Side B SCSI IN to the 2
nd
SCSI
channel.
Terminator
Use two Ultra160 rated SCSI terminators to terminate the SCSI connections. Connect the terminators to
the SCSI OUT on Side A and Side B.
Editing Computer
SCSI IN
SCSI IN
SCSI OUT
SCSI OUT
Side A
Side B
2nd SCSI
1st SCSI
Huge Media Vault - Dual
Install
Terminator
Host SCSI connections and terminations
Install
Terminator