Hubsan H501S X4 AIR, Руководство пользователя

Страница: 35 / 238

35
Advanced Performance Setup
1 Reverse channel setup
If you would like to reverse any of the stick functions, please follow the instructions
below. Be aware that this will reverse the control commands. Pull the throttle stick down
to the lowest position and long press the 'Enter' key to open the 'Main Menu' interface.
Use the Up / Down keys to select 'Set reverse' and use the 'Enter' key to switch between
modes. Long press 'Exit' key to save and exit.
Transmitters are by default set to Expert Mode out of factory
2 Man ual Mode Setting
This remote control is capable of flying the H5001S in Manual Mode when appropriately
configured. Please shut off GPS and follow the below steps to enter Manual Mode.
Pull and hold the throttle to its lowest position; simultaneously press on and hold the
non-throttle throttle joystick to enter the Main Menu. Scroll to "Set Manual" with the
non-throttle joystick and push the joystick right to confirm to enter. Set the setting to
"ON" to enable Manual Mode. Exit the Menu afterwards.
Manual Mode is by default set to “OFF”.