Hubsan H501S X4 AIR, Руководство пользователя

Страница: 24 / 238

24
Arming and Disarming Motors
Arming / starting motors
Simultaneously pull the transmitter joysticks diagonally down-
out to arm the motors (as shown in the below figure).
Disarming / stopping motors
Pull the throttle joystick all the way down until the copter has
completed its descent on the ground. Simultaneously pull the
transmitter joysticks diagonally down-out to disarm the motors
(as shown in the below figure).
Rapidly and continuously wiggle
the right stick left and right until all
4 LEDs flash slowly.
Hold the left stick up to the
right side of its socket.
Start
Calibration
complete
Repeat the rotation
When the LEDs turn red and
rotate clockwise, slowly and
smoothly rotate the X4 clockwise
until all the LEDs turn green
Do not disarm during flight. The motors will stop in mid-air, causing the aircraft to
fall and other such hazards.
Be sure to operate the virtual joysticks slowly and firmly. When disarming, wait
until the motor come to a complete stop before releasing the joysticks.