1 INTRODUCTION
2 SAFETY NOTES
Thank you for buying HUBSAN products. The helicopter is designed as an easy to
use, full featured RC helicopter model capable of all forms of rotary flight. Please read
the manual carefully before assembling the model, and follow all precautions and
recommendations within the manual. Be sure to retain the manual for future
reference, routine maintenance, and tuning.
1.1 IMPORTANT NOTES
This RC helicopter is not a toy, it utilizes various high-tech products and technologies
to provide superior performance.
Please read this manual carefully before operating this product. Improper use of this
product can result in serious injury. Be aware of your personal safety, safety of others
and your surrounding environment.
We recommend that you obtain the assistance of an experienced pilot before
attempting to fly our product for the first time.
2.1 CAUTION
R/C helicopters have parts that move at high speed, thus posing a certain degree of
danger. Pilots are responsible for any actions resulting in damage or injury from the
improper operation of their R/C aircraft models.
Choose a wide open space without obstacles. Do not operate R/C aircraft near
buildings, crowds of people, high voltage cables, or trees to ensure the safety of
yourself, others and your model.
Operate this unit within your ability. Do not fly whilst tired, improper operation may
cause in danger.
2.2 LiPo Battery Recharging
Your helicopter is powered by a Lithium-Polymer (LiPo) battery.
Never recharge your battery whilst it is inserted in your model. It can catch fire leading
to the total destruction of the item.
1
20
4
3
Important: Lift the arm and insert screw a from the left side.
At the end close the cover again with the 4 screws. Pay attention that
no cable will be squeezed.
9 RX Outlet
Aileron
LED light
Lower Rotor
Record Module
5.8G Module
Hold down ENT key for 1 Second to enter setting status. Press ENT
key to enter reverse setting status.Move arrow to Stick mode with
up/down key, push the stick from up to down 3 times, the Mode 2
will change to Mode 1 automatically, Press EXT key to confirm and
exit, Power on again then it will work.
5
>
>
>
>
>