U-ONE
®
-SAFETY Compact
Configuration manual SCU C / SRC C / SGS C
14
USC42_SCU-KonfigManual-en_R5
4.1.12 Pulldown menu: Options
FitCalc
The characteristic safety values
of the device depend on the
number of relay switching cy-
cles. The type determines the
number of relays.
Switching cycles p.a.: Number
of relay switching cycles per an-
num.
Click the button
to calcu-
late the characteristic safety val-
ues for a service life of
20 years
.
4.1.13 Pulldown menu: Options
Determine calibration factor
see chapter 5.3.2
4.1.14 Pulldown menu: “Analysis”
switch test
It is possible to alter the switch status by means of
a switch test incorporated in the configuration
software US42Pro. The switch test is only available
when the encoder shaft is at a standstill.
It is possible to oversee the changes to the
statuses of the switches via the Switch test dialog
box.
To confirm and activate the switch test click
CAUTION!
An error will be triggered if the encoder shaft turns during the switch test.
CAUTION!
The switch test has priority over programmed switching functions.
Fig. 4-9: Switchtest
Fig. 4-8: FitCalc
