Operating manual HBG 800-DP
Rev. 05 - 08/18
Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Germany, Tel. +49(0)7375/922066, FAX +49(0)7375/922077
1 of 16
Operating manual
Wireless hand wheel unit HBG 800-DP
Content
1.
Description ..................................................... 2
2.
Technical Data................................................ 2
2.1
Hand terminal HBG 800-DP ............................2
2.2
Access point HBG 800-DP...............................2
2.3
Charging station ...............................................2
2.4
Connecting Adaptor HBG 800-DP...................2
2.5
System timing...................................................2
2.5.1
Emergency stop + safety buttons..............2
2.5.2
All other buttons .......................................2
3.
Scope of delivery ........................................... 2
4.
Machine demands.......................................... 2
5.
Environmental conditions............................. 2
5.1
Kind of conditions ............................................2
5.2
Tolerance range ................................................2
6.
Operating elements ....................................... 3
6.1
Hand terminal HBG 800-DP ............................3
6.2
Accesspoint HBG 800-DP................................3
6.3
Charging station ...............................................4
6.4
Connecting adaptor HBG 800-DP ....................4
6.4.1
Address of Profibus ..................................4
6.4.2
Pin assignment..........................................5
7.
Installation ...................................................... 5
7.1
Profibus installation..........................................5
7.2
Out of operation................................................6
8.
Operation ........................................................ 6
8.1
Switching on and off of the hand terminal .......6
8.2
LCD display .....................................................6
9.
Set up...............................................................6
9.1
Used buttons .................................................... 6
9.2
Enter Set up ..................................................... 6
9.3
Change Set up .................................................. 6
9.4
Description of the menue points ...................... 7
9.5
Test routines .................................................... 7
9.6
Set up overview ............................................... 7
10. Start of operation............................................8
10.1
Channel selection............................................. 8
10.1.1
Field strength measurement ..................... 8
10.2
Set transmitting power ..................................... 8
10.3
Set minimum level ........................................... 8
11. Actions to avoid interruptions ......................8
12. Error solutions ................................................9
12.1
Possible errors.................................................. 9
12.2
Cause of errors................................................. 9
12.3
LOW - BATT display ...................................... 9
12.4
No function ...................................................... 9
13. Maintenance and care ..................................10
13.1
Change of rechargeable batteries ................... 10
13.1.1
Exchange of rechargeable batteries........ 10
14. Frequency table ............................................11
15. Safety instructions .......................................11
16. LED's in the access point ............................12
16.1
LED's in the connecting adaptor.................... 12
17. Spare parts ....................................................13
18. EG Declaration of Conformity .....................14
Appendix ...............................................................15
Profibus – Module description................................... 15
Connecting example Siemens 810D/840D ................ 16
