Hubitron Steueungstechnik ACS-1000, Руководство по эксплуатации

Страница: 7 / 14

Betriebsanleitung ACS-1000 Rev. 1.0 - 08/12 Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Tel. +49(0)7375/922066, FAX +49(0)7375/922077 Seite 7 von 14
8.4 Length compensation
So the wire has not to be exactly aligned on both
sides, you can compensate the wire deviation
through the length.
•
start length compensation:
main menu - -
follow the instruction on the display
•
position machine slide on the left side
• the sideways deviation can be max. 0.1 mm. If
necessary correct the Z axis until is
displayed
•
confirm with
•
position machine slide on the right side
NOTE:
Is the sideways deviation larger 1 mm, the position
of the wire must be corrected. The compensation
starts automatically again at the beginning.
•
confirm with
8.4.1 Delete compensation data
Is the length compensation not needed, the last
compensation data must be deleted:
•
start length compensation:
main menu - -
•
delete data with
8.5 Start measurements
Is the ACS-1000 arranged and compensated the
measuring can start:
•
start measuring: main menu -
•
position machine slide to the left
•
adjust machine slide that the wire is located at a
height of appr. 4 mm and a deviation < 0.1 mm
•
set display data to 0 ( )
•
measure machine at different length positions
(i.e. 0.5 m spacing)
9. Additional settings
9.1 Change language
The languages German and English are available:
• shut off the ACS-1000
• push and hold the function keys F3+F4
•
turn on the ACS-1000
With or choose the language and
confirm with
0 = German, 1 = English
9.2 Change ID
For the radio communication between the ACS-1000
and the remote control ACS-1000 RC both units
must have the same ID.
•
shut off the ACS-1000
•
push and hold the function keys F1+F3
•
turn on the ACS-1000
With or change marked field.
With change field.
Confirm change with