Huber Pilot ONE Unistat T3*0, Руководство по эксплуатации

Страница: 43 / 100

Function description
Chapter 3 OPERATION MANUAL
V2.4.0en/22.07.20//17.12
Unistat® T300 Series
43
Function
E-grade
Basic
E-grade
Exclusive
E-grade
Professi -
onal
Storage/loading temperature control programs onto USB stick – X X
Copying settings – – X
Service data recorders (flight recorder) X X X
PB commands
1
X X X
Communication Watchdog – – X
Process data recording directly to a USB stick: Setpoint, Actual Value
Internal and Actual Value Process / Heating Capacity %, Cooling Capaci-
ty %, and Pump Pressure / Pump Speed, and VPC Pressure
–/–/– X/X/– X/X/X
Calendar start – – X
3.5 Unistat® LED diagram
Operating states
▪ Stand-by: [LED 2] (when selecting Jacket temperature control) or [LED 1] (when selecting Process
temperature control).
▪ Circulation active: [LED 3], [LED 4], [LED 5] and [LED 6] illuminate.
▪ Cooling active: [LED 8] and [LED 9] illuminate. Only in connection with the operating state “Circu-
lation active”.
▪ HT cooling active: [LED 8] and [LED 9] illuminate. Only in connection with the operating state
“Circulation active”. Only for temperature control units with HT cooling.
▪ Heating active: [LED 7] illuminates. Only in connection with the operating state “Circulation ac-
tive”.
3.6 Clock/event function
3.6.1 Rechargeable accumulator
“Pilot ONE” is fitted with a clock that continues to run even when the temperature control unit is
switched off. The energy required for this purpose is provided by a rechargeable accumulator, which
is automatically charged when the temperature control unit is switched on. The accumulator is
dimensioned so that the clock can also continue to run for prolonged switch-off intervals (up to
several months). If, after extremely prolonged switch-off time, time and date have been deleted,
leaving the temperature control unit switched on for a few hours will usually suffice (no tempera-
ture control required). During this time, you can reset the time and date.
1 See Data Communication Manual. Anything controllable via the graphical user interface of the Pilot
ONE can be controlled by PB commands.
Diagram