1
2
3
4
5
6
7
A
D
INSERT HERE AND ROTATE UP
B
C
IF INSTALLING A ROW, JOIN FIXTURES
TOGETHER USING SCREWS IN HARDWARE KIT.
WIRING CONNECTIONS CAN GO THROUGH
BOTTOM HOLES IN END HEADERS
F
H
REMOVE LED ASSEMBLY BY REMOVING
(6) #8 SHEET METAL SCREWS
G
REPEAT STEP 3 AND INSTALL END
OF ROW END CAP
RE-INSTALL LED
ASSEMBLY
LOCATE AIRCRAFT CABLES ALONG A STRAIGHT LINE
IN CEILING PER DIMENSIONS SHOWN ON PAGE 1
(REFER TO INSTRUCTION SHEET 510481)
ON BOTH SIDES OF FIRST FIXTURE IN ROW (OR INDIVIDUAL) INSTALL
SWAGES ON YOKES BY INSERTING INTO HOLES IN END HEADER
ALONG FIXTURE AXIS AND ROTATING UPWARDS
INSTALL END CAP ON BEGINNING
OF ROW SIDE (OR BOTH SIDES OF
INDIVIDUAL FIXTURE) BY
INSERTING WELD STUDS INTO
PROPER HOLES (BE CAUTIOUS OF
LEFT HAND VS RIGHT HAND) AND
SECURING WITH #8-32 NUTS
PROVIDED IN END CAP KIT
(SHIPPED SEPARATELY)
RAISE FIXTURE UP AND INSTALL CABLE
HANGERS ONTO AIRCRAFT CABLE AND
MAKE WIRING CONNECTIONS
litecontrol.com
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN. IF
YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT, PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
INSTALLATION INSTRUCTIONS
FIXTURE SERIES: 22L
MOUNTING TYPE: PENDANT
REV / DATE: 0 / 10/19/18
PAGE: 2 OF 3
DRAWING: 510688
