Pub. 42004-533F
G A I - T R O N I C S
®
A H U B B E L L C O M P A N Y
HUBBCOM™ GSC3100/GSC4100
Dual-Port Flush-Mount Smart Controllers
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374
◼
800-492-1212
◼
Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
Confidentiality Notice
This manual is provided solely as an installation, operation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third
party.
General Information
This guide covers the installation of the HUBBCOM Dual-Port Flush-Mount Smart Controller, Models
GSC3100 and GSC4100. The Model GSC3100 Smart Controller includes a handset. The Model
GSC4100 Smart Controller is designed for hands-free operation and is not equipped with a handset (see
Figure 1)). See the GAI-Tronics website at
specifications, warranty information, and the GUDA (GAI-Tronics Universal Device Application).
HUBBCOM smart controllers require activation and configuration when placed into service. Use the
GUDA (GAI-Tronics Universal Device Application) software to configure the smart controller for its
intended purpose. Pub. 42004-531 provides instructions to obtain, install, and run the GUDA software.
Refer to Pub. 42004-551 for information on HUBBCOM smart controller configuration parameters (see
the Reference Documents section).
Important Safety Instructions
•
Read, follow, and retain instructions
—All safety and operating instructions should be read and
followed before operating the unit. Retain instructions for future reference.
•
Heed warnings
—Adhere to all warnings on the unit and in the operating instructions.
•
Attachments
—Attachments not recommended by the product manufacturer should not be used, as
they may cause hazards.
•
Servicing
—Do not attempt to service this unit by yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
•
HUBBCOM Smart Controllers are designed for indoor use only.
ATTENTION
—Install equipment without modification and according to all applicable local,
national, and international electrical codes. North America - Consult the
National Electrical Code (NFPA 70), Canadian Standards Association (CSA
22.1), and local codes for specific requirements regarding your installation.
Class 2 circuit wiring must be performed in accordance with the NEC.
