Pub. 42004-533F
HUBBCOM™ GSC3100/GSC4100 Dual-Port Flush-Mount Smart Controllers
Page 9 of 10
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-533F.docx
11/20
5.
Select the PC’s APIPA assigned network interface from the
S
ELECT
N
ETWORK
I
NTERFACE
dropdown list.
6.
Click the
F
IND
D
EVICES
button to perform a device discovery in the GUDA.
An ICON for the new HUBBCOM smart controller appears when the PC can connect to it.
7.
Click on the ICON for the HUBBCOM smart controller.
8.
Click the
C
ONNECT AND
C
ONFIGURE
button for the HUBBCOM smart controller.
9.
Login:
•
Username:
gai-tronics
•
Password:
pageparty
10.
Create a new username and password.
11.
Login to the HUBBCOM smart controller with the new username and password.
12.
Scroll down in the left pane and click on
A
CTIVATION
.
13.
Enter the smart controller’s activation code on the activation screen.
14.
Click the
A
PPLY
button to confirm the activation code.
A
R
EBOOT
button appears next to the
A
PPLY
button.
15.
Click
R
EBOOT
and confirm it.
The smart controller will reboot and will display the HUBBCOM splash screen again.
16.
Verify the smart controller activates and the model number is correct
1.
Click the Menu button.
2.
Click the Settings button.
•
The model is shown on the left side above the volume controls.
•
The model will show
NOT
SPECIFIED
if the smart controller is not activated.
17.
Use the GUDA to complete the configuration of the HUBBCOM smart controller.
N
OTE
:
Enter additional station parameters while activating the smart controller to save time. The
smart controller accepts and sets all entered parameters regardless of correct activation code
entry. Changing the network parameters of a HUBBCOM smart controller prevents the PC
from connecting to the smart controller until the PC’s IP address is on the same subnet as
that smart controller.
18.
Connect additional HUBBCOM smart controllers to the network and repeat the procedure to activate
and configure them.
Service and Spare Parts
Contact a regional service center for assistance if the equipment requires service or spare parts. A return
authorization number (RA#) will be issued if service is required. Ship equipment prepaid to GAI-Tronics
with an RA# and a purchase order number. Repair or a replacement is made in accordance with GAI-
Tronics’ warranty policy if the equipment is under warranty. Please include a written explanation of all
defects to assist our technicians in their troubleshooting efforts. Call 800-492-1212 inside the USA or
610-777-1374 outside the USA for help with identifying the Regional Service Center closest to you.
