Pub. 42004-484G
Clean Phone
®
Analog Telephones
Page 2 of 26
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-484G.docx
04/19
Features
Clean Phone
®
analog telephones offer the following features:
•
two auto-dial push buttons
•
flash
push button to access features of the telephone system
•
on/off push button with keypad for standard telephone operation
•
completely smooth front panel with chemical resistant overlay
•
auto-answer capability
•
oversized buttons for easy use with gloved hands
•
two programmable auxiliary outputs for peripheral control
•
standard or SMART (Self-Monitoring and Reporting Telephone) operation
•
UL/CSA 60950 compliant
•
FCC Part 68 Certified
Auto-Dial Buttons
The Model 295-001
x
Series Clean Phone
®
analog telephones feature two auto-dial buttons to store
frequently dialed telephone numbers. It is important to program the
Auto-dial Time Delay
option if using
the auto-dial feature. This sets the amount of time lapse between the auto-dial button press and the actual
dialing operation. The 10-second default delay may be too long when the feature is used for emergency
communication (see the Auto-Dialing section).
Flash Button
A
Flash
button is provided to enable the flash features of a PBX in the telephone system. This button is
labeled
FLASH/AUTO-DIAL
3
.
Auto-Answer
The Model 295-001
x
Series Clean Phone
®
analog telephones also offer programmable
activation/deactivation of the auto-answer feature. This feature allows the telephone to go off-hook
automatically to answer the call when active. All Clean Phone
®
analog telephones are factory
programmed for auto-answer.
A light under the ON portion of the
ON/OFF
button is illuminated to indicate the telephone is off-hook.
The telephone will not go off hook until someone presses the ON portion of the button when the auto-
answer feature is not active.
