Hubbell DUAL LITE LiteGear LG Series Скачать руководство пользователя страница 4

Section 100 System Installation Instructions

101. Specifications

Input

• Input voltage: Field Selectable 120 or 277Vac., (input voltage must be the same as output voltage).

• Input frequency: 60HZ ±2%

• Input surge protection: Meets UL 924

Output

• Output voltage: Field Selectable 120 or 277Vac., 60HZ., (output voltage must be the same as

 

input

voltage).

• Output frequency: Static ±5% based on a 0% - 100% resistive load

• Minimum loading: none required

• Output distortion: Less than 3% THD linear load

• Load power factor: .

88

 lead to .

88

 lag

• Output frequency: ±0.3 Hz during emergency

• Time to transfer to inverter after a utility power failure: <1 second

Battery

• Battery type: Maintenance free sealed Lead Calcium

• Battery charger: Fully automatic dual-mode with temperature compensation

• Recharge time: Meets UL requirements (96 Hours)

• Battery protection: Automatic low-battery voltage disconnect and reverse polarity protection.

• Standard batteries: Sealed Lead-Calcium: 7-year life

• Battery voltage: 60Vdc (375W) or 96Vdc (600W)

• Runtimes: 90 minutes standard

• Operating temperature: 20°C to 30°C (68°F to 86°F)

• Relative humidity: 95% non-condensing

Note: 

Lead Calcium battery performance rated at 25°C (77°F) for load.

Table 1 

System weights shown include installed batteries

MODEL  INPUT/OUTPUT  CAPACITY 

SYSTEM 

SYSTEM 

NUMBER  BATTERY  BATTERY 

AC INPUT 

THERMAL 

  NUMBER 

VOLTAGE 

For 1

1/2

 Hrs. 

WEIGHT 

EFFICIENCY 

OF 

VOLTAGE  CURRENT  CURRENT 

(MAX)

 

OUTPUT (BTUs)

(

Watts/VA) 

Lbs. 

Kg. 

(Full Load) 

BATTERIES 

(VDC) 

(Amps) 

120VAC  277VAC  On-Line  Emergency

LG375S

LG600S

120/277VAC

120/277VAC

375/375

600/600

113

172

51.3

78.1

98%

98%

5

8

60

96

7.3

7.1

3.43

5.50

1.49

2.38

11

15

205

275

18.0” (37.5cm)

18.0” (37.5cm)

16.625” (42.2275cm)

25.25” (64.135cm)

8.25” (20.32cm)

8.25” (20.32cm)

LG375S

LG600S

Содержание DUAL LITE LiteGear LG Series

















Отзывы: