10
©2018 Hubbell Incorporated | Chance
®
Capstan Hoist Operating Instructions
Before Hoisting
The most important part of the hoisting process is proper planning to ensure your safety and the
safety of others before starting the work. Knowing proper hoisting techniques can help keep you and
others around you safe.
Please be aware the information in this Owner’s Manual is general in nature. Because no two
situations are alike, it would be impossible to review every potential use of a capstan hoist. This
manual provides you with the general principles and techniques to help you use the capstan hoist
safely and effectively.
1. ALWAYS take your time to assess your situation and plan your lift carefully.
ALWAYS be aware of and comply with all federal, state, and local safety regulations, industry
standards, and internal safety guidelines.
A competent person shall apply careful thought to choose the safest arrangement possible. As
with any project involving lifting of loads, a competent person must analyze the forces, direction of
those forces, and consider what can happen in the event that there is a failure of a component of
the rigging system. This allows the competent person to ensure the proper hoist, rope, blocks, and
rigging are used to minimize risks.
A competent person shall thoroughly inspect the worksite and equipment to spot potential safety
issues.
When mounting the hoist, verify the mounting location (tower, truck, or other mounting structure)
can withstand the forces the capstan will apply and will not be adversely impacted by the mounting
and operation of the capstan hoist.
ALWAYS inspect hoist, rope, and any rigging equipment before use. Frayed, kinked, or damaged
rope must be replaced immediately. Damaged components must be replaced before use. Protect
parts from damage.
ALWAYS choose a mounting location that is strong enough to withstand the maximum pulling
capacity of your hoist.
ALWAYS use with mounts, components, and accessories authorized by Hubbell Power Systems.
ALWAYS use grade 5 mounting hardware.
NEVER weld mounting bolts.
ALWAYS keep foot control, power cords, and/or hydraulic lines clear of the capstan, rope, and
rigging. Inspect for cracks, pinches, frayed wires or loose connections. Damaged components must
be replaced before operation.
ALWAYS remove any element or obstacle that may interfere with safe operation of the hoist.
NEVER operate a capstan hoist without the appropriate foot control switch.
!
WARNING
