10
TD06118E_0519
12. Lower swingarm into the vault by grasping handle and lifting swingarm latch
13. Maintenance
a. Ensure all hardware is securely fastened before operation
b. Ensure spring pin slides freely
!
CAUTION
!
CAUTION
When lower equipment into vault, ensure handle on outer tube is firmly held while actuating the swingarm latch to
prevent damage to cables, closure, and/or vault. SEE FIGURE 14
When lowering the swingarm into the vault, ensure the fiber cable is coiled as shown in Figure 15 to ensure the
minimum bend radius is not violated and to prevent damage to the cables and/or closures.
FIGURE 14
(shown - PSC2080547 End Mount)
FIGURE 15
(shown - PSC2080548 Side Mount)
Swingarm Latch
These instructions do not claim to cover all details or variations in equipment nor to provide for all possible conditions to be met with
concerning installation, operation, or maintenance of this equipment. If further information is desired or if particular problems are encountered
which are not sufficiently covered in this guide, contact Hubbell Power Systems.
