3
PSC2080547 & PSC2080548 Swingarm
!
NOTICE
GUIDE TO WARNINGS WITHIN MANUAL
The following is a list of warnings used within this manual and should be read in their entirety to
ensure safe practices.
GUIDE TO WARNINGS FOR THE HUBBELL
TM
COMMSCOPE FDH 4000 SWINGARM
!
CAUTION
A NOTICE refers to information that is considered
important, but not hazard-related.
!
WARNING
A WARNING refers to operating procedures, techniques,
etc., that, if not followed carefully, could RESULT IN
INJURIES OR DEATH.
A CAUTION refers to operating procedures, techniques,
etc., that, if not followed carefully, could RESULT IN
DAMAGE TO EQUIPMENT or LOSS OF SERVICE to
customer.
!
CAUTION
The equipment covered in these instructions must be used and serviced only by competent, trained personnel
familiar with and following approved work and safety practices. This equipment is for use by such personnel and
these instructions are not intended as a substitute for adequate training and experience in safe procedures for this
type of equipment.
These instructions neither cover all details or situations in equipment use, nor do they provide for every possible
contingency to be encountered in relation to installation, operation or maintenance. Should additional information
or details be desired or if situations arise which are not covered adequately for the user’s purpose, the specifics
should be referred to Hubbell Power Systems, Inc.
!
WARNING
When retracting equipment from an extended position, ensure handle on outer tube is firmly held when actuating
the spring pin to prevent damage to cables, closure or personal injury.
!
NOTICE
Before operating the Commscope FDH 4000 Swingarm, thoroughly read, understand and follow these instructions.
Keep these instructions for future reference.
