5
PSC2080547 & PSC2080548 Swingarm
PRODUCT INSTALLATION AND USE INSTRUCTIONS
1. Disassemble the mounting bracket from the inner tube assembly as shown below in FIGURE 1 (optional)
2. PSC2080547 (END MOUNT):
a. For single swingarm: Mark the centerline of the top mounting holes 6.5” from the lid lip as shown in
FIGURE 2. Center the mounting holes on the centerline of the vault.
NOTE: Ensure placement of mounting bracket allows vault lid to close and avoids structural ribs of
vault.
b. For dual swingarm: Mark the centerline of the top mounting holes 6.5” from the lid lip. Mark the
centerline of the hole closest to the centerline of the vault 4.25” from the centerline of the vault (see
FIGURE 3).
NOTE: Ensure placement of mounting bracket allows vault lid to close, avoids structural ribs of vault,
and avoids second swingarm.
Inner Tube
Mounting Bracket
(shown - PSC2080547 End Mount)
FIGURE 1
Lid Lip
Lid Lip
FIGURE 2
End Mount
Single Mount
FIGURE 3
End Mount
Double Mount
