12
Grounded in the negative direction
G
ro
un
de
d
Grounding locating
Threshold 060K
Ω
Detection 050K
Ω
N
eg
ati
ve
dir
ec
tio
n
Jaw opening open
Current
clamp’s
jaw
opening open
Grounding locating
Part 6. Directions for use
1. Make the analyzer’s power switch off, insert output signal line plug into
the socket of analyzer, clip the positive bus-bar (red crocodile clip) of signal
output line on the positive ground of current bus-bar, clip negative bus-bar of
signal output line (black crocodile clip) on negative ground of current bus-bar,
clip ground of signal output line (green crocodile clip) on the iron shell (the
ground) of DC cabinet.
2. Place analyzer's 'bus-bar/by-pass' switch on 'bus-bar', analyzer starts to
detect. If it's grounded, the LCD will show the value of the resistance and