5
The Multifunctional Partial Discharge Tester host is at automatic mode and collecting
wave without trigger.
The Multifunctional Partial Discharge Tester host is continuously collecting wave data
by scanning method and displaying the wave data.
● The Multifunctional Partial Discharge Tester host stops wave data collection.
S
The Multifunctional Partial Discharge Tester host has completed the single sequence
acquistion.
2. Multifunctional Partial Discharge Tester host tool icons
: turn brighter means keyboard is locked, the tester is controlled by USB and the
keyboard is locked.
: turn brighter means USB is connected, if grey means no USB.
：
Turn bright When connected with PC by USB, otherwise it is grey.
1.5 Menu
Press” Menu” button, menu bar is shown at the bottom of the display.
Change the setting options by pressing F1-F5 buttons when needs to change a different
requirement at the test.
3.6 Menu bar and operation
1.
Channel selection:
Press” CH1”, “ CH2” buttons to select current channel.
Press CH1 to select Channel 1, then press “ Menu” button to setup or change current
channel 1 data or parameters.
Press CH2 to select Channel 2, then press” Menu” button to setup or change current
channel 2 data or parameters.
Watch the red box shown at the below screen to know chosen Channel 1 or Channel2,
displaying CH1 means Channel 1, displaying CH2 means Channel2.