4
3.2 Charge Main Tester
The main tester should be charged when first use, the fully-charged time is 7 hours. The
charging time will reduce if the tester is partially charged. The charging will be stopped if
the battery is fully charged. The charging status is indicated by the charging light at the
panel.
1) light on : battery is charging
2) light off: Battery is not charging, charging is completed or charger is off.
3.3 Main tester Run/Off
1) Start: Press the Run button to power on, wait for 30 seconds the tester will be started,
the start button will be in yellow light.
2) Off: Press and hold down the start button to stop the main tester. The tester is off
when the main display is black.
3) Standby: The main tester will be at standby automatically when the main tester is not
operated for long, the start button will be in red light.
When the main tester is at standby state, press any key to activate the main tester.
3.4 Display zones
1.
Multifunctional Partial Discharge Tester host setting status information
T The Multifunctional Partial Discharge Tester host has detected a trigger and collecting
information after triggering.