14
AUTORANGE Open
The tester will be then at automatic trigger state, the Channel 1 screen will display the
current high frequency current transformer testing discharge signals .
Non-discharge Signals
with discharge signals
When the discharge signal is too large ,the value at the screen will then turn red, at this
moment the sensor is in saturation state.
Sensor Saturated
4. Save
To save the current discharged signal, You need to prepare a USB disk to store the
graphics.
Save Graphics: Press” SAVE/RECALL”, open the save/recall menu bar, press “ graphic”
F5 key to save, the discharge signals will be stored at the USB. After testing, plug the USB
at the PC, you can read the stored discharge signal waves at PC.