Figure B-2
Adjusting VPT300 parameters
Table B-1
VPT300 parameter description
Parameter
Description
Setting
Connection type
IP address obtaining
mode of the VPT300.
●
Static IP
: The IP
address of the camera
is allocated by the
network
administrator. You
need to set
Camera
IP
,
Subnet mask
, and
Gateway address
.
●
Dynamic IP
: The
endpoint
automatically obtains
an IP address using
the Dynamic Host
Configuration
Protocol (DHCP). If
you select this option,
a DHCP server must
be available on the
network.
Set this parameter based
on the site requirements.
The default value is
Static IP
.
VPT300 Intelligent Camera
Installation and Commissioning Guide
（
Single-
VPT300
）
B Upgrading the Camera Software
Issue 04 (2020-02-11)
Copyright © Huawei Technologies Co., Ltd.
36
