Huawei TP3206 Скачать руководство пользователя страница 9

Страница: 9 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

2 Installation Precautions

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential



Before working at height, take safety protection measures, including wearing a helmet

and protective gloves.



When working at height, keep operation tools and devices with you at all times to

prevent them from falling.



When working at height, maintain balance to prevent yourself from falling.

Environmental Requirements



Place the device in a well-ventilated place. Do not expose the device to direct sunlight.



Install the device strictly according to the requirements of the manufacturer.



Do not place any object on top of the device. Reserve a minimum space of 10 cm at the

four sides of the device for heat dissipation.



Do not place the device on or near flammable materials such as foam.



Keep the device away from heat sources or fires, such as radiators or candles.



Keep the device away from any household appliances that generate strong

electromagnetic fields, such as microwave ovens, refrigerators, or mobile phones.

Operating Requirements



Do not allow children to play with the device or accessories. Swallowing the accessories

may be fatal.



Use only accessories, such as the power adapter and battery, provided or authorized by

the manufacturer.



Ensure that the device does not get wet. If water gets into the device, disconnect the

power supply immediately and unplug all the cables connected to the device, such as

power cables, telephone cables, and RF cables, and then contact the appointed

maintenance center.



Before plugging in or unplugging any cable, shut down the device and disconnect the

power supply. While plugging in or unplugging any cable, ensure that your hands are

dry.



Do not step on, pull, or over bend any cable. Otherwise, the cable may be damaged,

leading to malfunction of the device.



Do not use old or damaged cables.



During electrical storms, disconnect the device from the power supply and unplug all the

cables connected to the device.



Keep the power plug clean and dry, to prevent electric shock or other dangers.



If the device is not used for a long time, disconnect the power supply and unplug the

power plug.



If smoke, abnormal sound or smell is emitted from the device, stop using the device

immediately, disconnect the power supply, unplug the power and other cables, and

remove the batteries. Then, contact the appointed maintenance center for repair.



Ensure that no object (such as metal shavings) enters the device through the heat

dissipation vent.



Before connecting any other cable, connect the ground cable of the device. Do not

disconnect the ground cable until you have disconnected all the other cables.



Ensure that the three-phase power socket is properly grounded. The neutral line and the

live line cannot be connected inversely.

Содержание TP3206









































































































































































































Результаты поиска

Содержание TP3206

Отзывы:

Похожие инструкции для TP3206

Бренды по названию

Популярные бренды

Huawei TP3206, Руководство по установке

Результаты поиска

Содержание TP3206

Отзывы:

Похожие инструкции для TP3206

Бренды по названию

Популярные бренды