Huawei SUN2000-60KTL-M0 Скачать руководство пользователя страница 83

Страница: 83 / 127

Table 7-4 LED indicator description

LED Indicator

Status

Meaning

Green off

There is no operation

with a USB flash drive.

Blinking green slowly

There is an operation

with a USB flash drive.

Blinking green fast

An operation with a

USB flash drive has

failed.

Steady green

An operation with a

USB flash drive is

successful.

8. The system automatically restarts when the upgrade is completed. All LED

indicators are off during the restart. After the restart, the indicator is blinking

green slowly for 1 minute and then it becomes steady green, which indicates

that the upgrade is successful.

7.2 Operations with the SUN2000 App

NO TICE

● When you use the SUN2000 app to set parameters for the SUN2000, setting

items on certain parameter setting screens are not displayed if the AC switch

between the SUN2000 and the power grid is turned on but both of DC

SWITCH on the SUN2000 are not in the ON position. Switch both of DC

SWITCH to the ON position and then reset relevant parameters again.

● If you change the grid code, some parameters may be restored to factory

defaults. After the grid code is changed, check whether the previously set

parameters are affected.

● Delivering a reset, shutdown, or upgrade command to the solar inverters may

cause power grid connection failure, which affects the energy yield.

● Only professionals are allowed to set the grid parameters, protection

parameters, feature parameters, and power adjustment parameters of the solar

inverters. If the grid parameters, protection parameters, and feature parameters

are incorrectly set, the solar inverters may not connect to the power grid. If the

power adjustment parameters are incorrectly set, the solar inverters may not

connect to the power grid as required. In these cases, the energy yield will be

affected.

NO TE

● Configurable parameters vary depending on the grid code. The actual display prevails.
● The parameter names, value ranges, and default values are subject to change. The

actual display prevails.

SUN2000-(60KTL, 65KTL)-M0

User Manual (Mexico Edition)

7 Man-Machine Interactions

Issue 06 (2020-10-12)

Содержание SUN2000-60KTL-M0
































































































































Результаты поиска

Содержание SUN2000-60KTL-M0

Отзывы:

Похожие инструкции для SUN2000-60KTL-M0

Бренды по названию

Популярные бренды

Huawei SUN2000-60KTL-M0, Руководство пользователя

Результаты поиска

Содержание SUN2000-60KTL-M0

Отзывы:

Похожие инструкции для SUN2000-60KTL-M0

Бренды по названию

Популярные бренды