7
Installing the PE Cable
4.2
Ground
point
Click
Do not connect the neutral wire to the enclosure as a PE cable. Otherwise, electric shocks will be
caused.
Recommended: Apply silica gel or paint around a ground terminal after connecting the ground
cable.
The PE point at the AC output port is used only as a PE equipotential point, and cannot substitute
for the PE point on the enclosure.
NOTE
1. Connect the AC output power cable to the AC connector.
Installing the AC Output Power Cable
4.3
Ensure that the protection layer of the AC output power cable is in the connector, and that the
exposed core wire is totally inserted into the cable hole and connected securely. Failing to do so
may cause SUN2000 malfunction or damage.
Three-Core Cable (L, N, and PE)
