Huawei SUN2000-100KTL Скачать руководство пользователя страница 35

Страница: 35 / 156

Category

Tool

Measuring tape

Bubble or digital

level

Hydraulic pliers

Heat shrink

tubing

Heat gun

Cable tie

Scissors

N/A

Personal

protective

equipment (PPE)

Safety gloves

Safety goggles

Dust mask

Safety boots

4.3 Determining the Installation Position

Installation Environment Requirements

●

Do not install the inverter in working or living areas.

●

If the device is installed in public places (such as parking lots, stations, and

factories) other than working and living areas, install a protective net outside

the device, set up a safety warning sign to isolate the device, and prevent

unauthorized personnel from approaching the inverter. This is to avoid

personal injury or property loss caused by accidental contact or other reasons

during device operation.

●

Do not install the inverter in areas with flammable materials.

●

Do not install the inverter in areas with explosive materials.

●

Do not install the inverter in areas with corrosive materials.

●

Do not install the inverter where its enclosure and heat sinks are easily

accessible, because the voltage is high and these parts are hot during

operation.

●

Install the inverter in a well-ventilated environment for heat dissipation

●

If the inverter is installed in an airtight environment, a heat dissipation device

or ventilation device must be installed to ensure that the indoor ambient

temperature is not higher than the external ambient temperature during

operation.

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series

User Manual

4 Installation

Issue 11 (2021-11-10)

Содержание SUN2000-100KTL





























































































































































Результаты поиска

Содержание SUN2000-100KTL

Отзывы:

Бренды по названию

Популярные бренды

Huawei SUN2000-100KTL, Руководство пользователя

Результаты поиска

Содержание SUN2000-100KTL

Отзывы:

Бренды по названию

Популярные бренды