Huawei RRU3971, Руководство по установке

Страница: 108 / 134

Cable One End The Other End
Connector Installation
Position Connector Installation
Position
RRU Power
Cable Tool-less female
connector
(pressfit type) NEG(-) and
RTN(+) ports
on the RRU Depending on
the power
supply
equipment External power
equipment
RRU Alarm
Cable DB15 male
connector EXT_ALM
port on the
RRU Cord end
terminal External alarm
device
CPRI Fiber
Optic Cable DLC connector CPRI0 port on
the RRU DLC connector CPRI port on a
board in the
BBU
RRU RF Jumper 4.3-10 straight
male connector
RF ports on the
RRU 4.3-10 straight
male connector Antenna system
RRU AISG
Multi-Wire
Cable DB9 waterproof
male connector RET port on
the RRU Standard AISG
female
connector Standard AISG
male connector
on the RCU or on
the AISG
extension cable
RRU AISG
Extension Cable Standard AISG
male connector Standard
AISG female
connector on
the AISG
multi-wire
cable Standard AISG
female
connector Standard AISG
male connector
on the RCU
8.5 Installing an RRU PGND Cable
This section describes the procedure for installing an RRU PGND cable.
Context
The cross-sectional area of an RRU PGND cable is 16 mm
2
(0.025 in.
2
). The cable has an M6
OT terminal at one end and an M8 terminal at the other end.
DANGER
Install RRU PGND cables by strictly following the following operations. Otherwise, damage to
the RRU or personal injury may occur.
8 Installing RRU Cables
Issue () Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99