Huawei RRU3804 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 90

background image

Complying with the Local Safety Regulations

When operating the device, comply with the local safety regulations. The safety precautions
provided in the documents are supplementary. You must comply with the local safety
regulations.

General Installation Requirements

The personnel in charge of installation and maintenance must be trained and master the correct
operating methods and safety precautions before beginning work.

The rules for installing and maintaining the device are as follows:

l

Only the trained and qualified personnel can install, operate and maintain the device.

l

Only the qualified specialists are allowed to remove the safety facilities, and repair the
device.

l

Any replacement of the device or part of the device (including the software) or any change
made to the device must be performed by qualified or authorized personnel of Huawei.

l

Any fault or error that might cause safety problems must be reported immediately to the
personnel in charge.

Grounding Requirements

The following requirements are applicable to the device to be grounded:

l

Ground the device before installation and remove the ground cable after uninstallation.

l

Do not operate the device in the absence of a ground conductor. Do not damage the ground
conductor.

l

The unit (or system) must be permanently connected to the protection ground before
operation. Check the electrical connection of the device before operation and ensure that
the device is reliably grounded.

Safety of Personnel

Ensure the following:

l

When lightning strikes, do not operate the device and cables.

l

When lightning strikes, unplug the AC power connector. Do not use the fixed terminal or
touch the terminal or antenna connector.

NOTE

The previous two requirements are suitable for the wireless fixed terminal.

l

To prevent electric shock, do not connect safety extra-low voltage (SELV) circuits to
telecommunication network voltage (TNV) circuits.

l

To prevent laser radiation from injuring your eyes, never look into the optical fiber outlet
with unaided eyes.

l

To prevent electric shock and burns, wear the electrostatic discharge (ESD) clothing, gloves
and wrist strap, and remove conductors such as jewelry and watch before operation.

1 Safety Information

RRU3804

User Guide

1-2

Huawei Technologies Proprietary

Issue 01 (2007-11-29)

«
...
16
17
18
19
20
...
»

Содержание RRU3804



























































































Отзывы:

Нет отзывов

Похожие инструкции для RRU3804

Two-Knife Booklet Trimmer-A1

Бренд: Canon Страницы: 32

Perfect Binder-C1

Бренд: Oce Страницы: 82

Бренд: Campbell Страницы: 2

Бренд: K&M Страницы: 6

Bass Master Rockabilly

Бренд: K&K Sound Страницы: 2

PRIME DESIGN VCR 326

Бренд: Safe Fleet Страницы: 16

Prime Design VBC PC11

Бренд: Safe Fleet Страницы: 8

Бренд: Saful Страницы: 7

Бренд: Saft Страницы: 66

Prime Design AR1418

Бренд: Safe Fleet Страницы: 4

AERASGARD RCO2-W

Бренд: S+S Regeltechnik Страницы: 32

Бренд: X10 Страницы: 1

Бренд: EUFAB Страницы: 12

Бренд: Fisher-Price Страницы: 12

Бренд: Oasis Страницы: 2

Efector200 OJ51 Series

Бренд: IFM Страницы: 8

Бренд: babyplus Страницы: 36

Бренд: Globalsat Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды