Installation Manual – Antenna & Feeder System Installation
BTS3802C & RRU
Chapter 2
Installing RF Antenna & Feeder System
2-34
40
00
40
0
(1)
(3)
(2)
(4)
(5)
(1) Feeder connector
(2) Wrapped connector
(3) Lifting rope
(4) Knot of the rope
(5) Feeder
Figure 2-32
Protection of the feeder connector (unit: mm)
3) Fix the upper end of the feeder in a proper position by multiple-point fastening
lest that the feeder falls from the tower. However, it shall not be too close to the
antenna, as shown in Figure 2-33. Based on the different fixing requirements,
select the 1-for-3 or 1-for-1 fixing clip, as shown in Figure 2-34 and Figure 2-35.
