manualshive.com logo in svg

Huawei RH2288 V3, Руководство пользователя

Поделиться
Скачать
Huawei RH2288 V3 Скачать руководство пользователя страница 90

Step 2

Connect the connectors on the other end of the PS/2 cable to the keyboard and mouse.

Step 3

Connect the DB15 connector on the VGA cable to the VGA port on the front or rear panel of
the server, and tighten the two screws on the connector to secure the cable.

Step 4

Connect the other end of the VGA cable to the VGA port on the monitor. Tighten the two
screws on the connector to secure the cable.

Figure 3-15

 Connecting a USB-to-PS/2 cable and a VGA cable

----End

3.5.2 Connecting a Network Cable

Connect a network cable in the following scenarios:

l

The network needs to be set up over GE.

l

You want to log in to the iMana/iBMC of the server using the management network port
for device management.

l

One or more network cables do not work.

l

A network cable needs to be replaced if the existing network cable does not meet length
requirements after a device is replaced or moved.

Conditions:

l

Use a network cable tester to check that the new network cable works properly.

l

Check that the new network cable is of the same model as or compatible with the
network cable to be replaced. Determine whether they are straight-through or crossover
cables.

l

Before installing a network cable to a network port, check that the network cable
connector is intact and the pins have no sundries or deformation.

The following tools are available:

l

Phillips screwdriver: used to tighten screws

l

ESD wrist strap or ESD gloves: used to prevent ESD damage

l

Diagonal pliers: used to trim the cable ties after binding cables

RH2288 V3 Server
User Guide

3 Installing and Removing the Server

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

78

Содержание RH2288 V3




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды