manualshive.com logo in svg

Huawei RH2288 V3, Руководство пользователя

Поделиться
Скачать
Huawei RH2288 V3 Скачать руководство пользователя страница 192

7.29 Removing the Screw-in RAID Controller Card

Remove a screw-in RAID controller card before replacing it with a new one. The appearance
and position of a screw-in RAID controller card may vary according to models, but the
removal method is the same.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the RH2288 V3. For details, see 

4.2 Powering Off the Server

.

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 6

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 7

Remove full-height full-length riser cards if they are installed. For details, see 

7.19 Removing

the Riser Card

.

Step 8

Remove the supercapacitor if it is installed. For details, see 

7.33 Removing the

Supercapacitor (Screw-in RAID Controller Card)

.

Step 9

Determine the position of the RAID controller card. See 

Figure 7-58

.

Figure 7-58

 Position of the RAID controller card

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

180

Содержание RH2288 V3




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды