manualshive.com logo in svg

Huawei RH2288 V3, Руководство пользователя

Поделиться
Скачать
Huawei RH2288 V3 Скачать руководство пользователя страница 299

Step 5

Obtain the mapping between slot IDs and SSD drive letters based on the mapping between the
slot IDs and bus IDs.

For example, as shown in 

Figure 9-21

, drive letter 

nvme0n1

 maps to bus ID 

0000:81:00.0

.

According to the information obtained in 

Figure 9-20

, bus ID 

0000:81:00

 maps to slot ID 8.

Therefore, drive letter 

nvme0n1

 maps to slot ID 

8

.

NOTE

The slot IDs queried in 

Step 2

 should be consistent with the slot IDs (4 to 7) marked on the server. If

they are not, get them from the 80 IDs obtained in 

Step 4

. For example, "02.0" in 80 ID 

0000:80:02.0

indicates the slot number.

----End

9.9 Erasing Storage Media Data

Storage media data can be erased by using the Linux command 

badblocks

 or the Toolkit.

Scenarios

l

Scenario 1: The storage media where data is to be erased is not in a redundant RAID
array and the board OS is running properly. In this scenario, use the Linux command

badblocks

 to erase the storage media data.

l

Scenario 2: The storage medium is not in a redundant RAID array and the OS is not
running properly. In this scenario, use the Toolkit to erase the storage media data.

l

Scenario 3: The storage medium is in a redundant RAID array. In this scenario, migrate
the storage medium to an idle server, mount the Toolkit to the idle server, and erase data
from the storage medium.

Preparations

Prerequisites

l

Scenario 1: The storage media where data is to be erased is not in a redundant RAID
array and the board OS is running properly.

l

Scenario 2: The storage medium is not in a redundant RAID array and the OS is not
running properly.

l

Scenario 3: The storage medium is in a redundant RAID array.

Data

l

The number of the enclosure where the storage media is

l

The slot number of the storage media

l

Position of the storage media

Software

The Toolkit (File name: FusionServer Tools-Toolkit-Vxxx.zip) has been downloaded and
decompressed, and the image file (File name: FusionServer Tools-Toolkit-Vxxx.iso) is
obtained after the decompression.

Hardware

RH2288 V3 Server
User Guide

9 Common Operations

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

287

Содержание RH2288 V3




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды