Huawei Quidway S3100 Series, Руководство по эксплуатации

Страница: 467 / 514

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches
Chapter 1 Information Center
Huawei Technologies Proprietary
1-7
Note:
To view the debug information of specific modules, you need to set the information type
as debug in the info - center source command, and enable the debugging function on
corresponding modules by using the debugging command.
1.2.3 Enabling Information Output to the Console
Table 1-6 lists the related configurations on the switch.
Table 1-6 Enable information output to the console
Operation Command Description
Enter system view system-view —
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the
console info-center console
channel
{ channel - number |
channel - name }
Required
By default, the switch does
not output information to the
console.
Define an
information source
info - center source
{ modu - name | default }
channel { channel - number |
channel - name } [ { log | trap
| debug } * { level severity |
state state } * ]
Required
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
To view debug/log/trap output information on the console, you should also enable the
corresponding debug/log/trap terminal display on the switch.
For example, to view log information of the switch on the console, you should not only
enable log information output to the console, but also enable logging terminal display
with the terminal logging command.
Table 1-7 Enable debug/log/trap terminal display
Operation Command Description
Enable the
debug/log/trap
terminal display
function
terminal monitor
Optional
By default, this function is
enabled for console user.