Huawei Quidway S3100 Series, Руководство по эксплуатации

Страница: 259 / 514

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Chapter 1 AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-27
Table 1-20 Set the timers of RADIUS server
Operation Command Description
Enter system
view
system-view
—
Create a
RADIUS
scheme and
enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Set the
response
timeout time of
RADIUS servers
timer response-timeout
seconds
, or
timer second
Optional
By default, the response timeout
timer of RADIUS servers expires
in three seconds.
Set the wait time
for the primary
server to restore
the active state
timer quiet minutes
Optional
By default, the primary server
waits five minutes before
restoring the active state.
Set the real-time
accounting
interval
timer realtime-accounting
minutes
Optional
By default, the real-time
accounting interval is 12 minutes.
1.5.11 Configuring Whether or not to Send Trap Message When RADIUS
Server is Down
Table 1-21 Configure whether or not to send trap message when RADIUS server is
down
Operation Command Description
Enter system view system-view —
Enable the sending
of trap message
when RADIUS
server is down radius trap
{ authentication-server-do
wn |
accounting-server-down }
Optional
By default, the switch does
not send trap message when
its RADIUS server is down.
Note:
z
This configuration takes effect on all RADIUS schemes.
z
A device considers its RADIUS server as being down if it has tried the configured
maximum times to send packets to its RADIUS server but does not receive any
response.