Huawei PI-DC A11 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

Huawei PI-DC A11 Скачать руководство пользователя страница 1

OptiX RTN PI-DC A11
Product Overview and Installation Guide

Issue:

04

Date:

2018-10-30

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.

01

Safety Precautions

• Always hold an insulated part of the P&E cable. Never touch the RJ45 connector.

• Do not touch the pins inside the P&E port on the PI with your hands or a conductor.

• Be sure to connect the power cables of the PI correctly to the positive and negative terminals of the power supply

device .To prevent damage to power cables or devices caused by short-circuits, install a circuit breaker on the

negative terminal of the power supply device.

• Do not install or remove a live P&E cable.

HUAWEI TECHNOLOGIES CO., LTD .

1
2
3
...
»

Содержание PI-DC A11









Отзывы:

Нет отзывов