Connecting Cables to a Power Cable Connector
Connecting Cables to the Power Cable Connector
3
38
Appendix
Route a cable into the pow er cable
connector.
1
Power Cable
Connector Terminal
Cable
-
-48 V power cable (blue)
+
0 V ground cable (black)
Fasten the cable.
2
Pull the cable slightly. If the cable is loose, fasten it
again.
3
After fastening a cable, check whether the cable core is exposed outside the power cable
connector terminal. If the cable core is exposed, re-route the cable into the power cable
connector. If the cable core is still exposed after you re -route the cable, peel the cable again.
After the power switch is turned on, sparks may be generated at the exposed cable core when
an inappropriate operation is performed.
Caution
Pull the cable
slightly.
Slide the pow er cable connector's cover to close it.
4
M3 screw
5
Connecting cables to the pow er cable
connector is complete.
All the cables are
fastened, and no
cable core is
exposed outside the
pow er cable
connector.
The cover is closed.
