Huawei OceanStor 18000 V3 Series, Руководство по функциям

Страница: 74 / 196

Figure 4-2 Configuration requirements of virtual network adapters
Table 4-2 Configuration requirements of virtual network adapters
Name Configuration
Requirement Example
Networ
k
adapter
2 vmnic0 connects to
controller A of the local
and remote storage
systems in the HyperMetro
pair.
n
Switch name: vSwitch 1
n
Physical adapters name: vmnic0
n
Physical adapters IP addresses and
mask: 192.168.6.31/255.255.255.0
Networ
k
adapter
3 vmnic1 connects to
controller B of the local
and remote storage
systems in the HyperMetro
pair.
n
Switch name: vSwitch 2
n
Physical adapters name: vmnic1
n
Physical adapters IP addresses and
mask: 192.168.7.31/255.255.255.0
– When deploying the arbitration software using physical machines, the two ports of
the quorum server are not bonded and you are advised to configure service IP
addresses at two different network segments for arbitration ports. In this example,
arbitration software is deployed on physical machines, and two ports of the quorum
server are not bonded.
Table 4-3 lists configuration examples.
Table 4-3 Examples for configuring IP addresses of arbitration services
Arbitration
Port Service IP Address Mask
Arbitration
port 1 192.168.6.31 255.255.255.0
Arbitration
port 2 192.168.7.31 255.255.255.0
Run the vi command to open the configuration file of the network adapter used by the
quorum server for arbitration. The following uses network adapters eth1 and eth2 for
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66