N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
197
9.
Lower the securing rod near the
or
label. See step (4) in
10.
Align the heat sink with the fastening studs on the CPU socket, and place the heat sink
on the CPU. See step (1) in
shows the heat sink direction.
Figure 7-56
Installing a heat sink
11.
Use a Phillips screwdriver to tighten the four screws on the heat sink in the diagonal
direction. See step (2) in
----End
7.28 Removing a DIMM
This topic describes how to remove a dual in-line memory module (DIMM) before replacing
it with a new one.
Scenarios
Remove a DIMM in any of the following scenarios:
A DIMM fails.
A DIMM is to be replaced with a new model.
Prerequisites
Conditions