N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
182
You have determined the position on the N2000H V3 for installing a RAID controller
card.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves
M3 Phillips screwdriver
Packaging materials, for example, an ESD bag
Hardware
You have obtained a spare RAID controller card.
Procedure
Step 1
(Optional) Remove the rubber plugs from the ports on the RAID controller card if any. See
Figure 7-41
Ports with rubber plugs
Step 2
Take the spare RAID controller card out of the ESD bag.
Step 3
Determine the position for installing the RAID controller card. See
The N2000H V3 supports dual RAID controller cards, which are installed on the mainboard
and a PCIe slot respectively. This topic uses the RAID controller card on the mainboard as an
example.