Huawei MC509 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 78

background image

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For
any assistance, please contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People

’s Republic of China

Tel: +86-755-28780808 Global Hotline: +86-755-28560808 Website:

E-mail:

[email protected]

Please refer color and shape to product. Huawei reserves the right to make changes or improvements to any
of the products without prior notice.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and
possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble,
decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions
are prohibited by applicable laws or such actions are approved by respective copyright holders under
licenses.

Trademarks and Permissions

,

, and

are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective
owners.

Notice

Some features of the product and its accessories described herein rely on the software installed, capacities
and settings of local network, and may not be activated or may be limited by local network operators or
network service providers, thus the descriptions herein may not exactly match the product or its accessories
you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications
contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE
LAWS,  NO  WARRANTIES  OF  ANY  KIND,  EITHER  EXPRESS  OR  IMPLIED,  INCLUDING  BUT  NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE,  ARE  MADE  IN  RELATION  TO  THE  ACCURACY,  RELIABILITY  OR  CONTENTS  OF  THIS
MANUAL.
TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  IN  NO  CASE  SHALL  HUAWEI
TECHNOLOGIES  CO.,  LTD  BE  LIABLE  FOR  ANY  SPECIAL,  INCIDENTAL,  INDIRECT,  OR
CONSEQUENTIAL  DAMAGES,  OR  LOST  PROFITS,  BUSINESS,  REVENUE,  DATA,  GOODWILL  OR
ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary
governmental permits and licenses in order to export, re-export or import the product mentioned in this
manual including the software and technical data therein

«
1
2
3
4
...
»

Содержание MC509















































































Отзывы:

Нет отзывов

Похожие инструкции для MC509

Бренд: Febco Страницы: 4

Бренд: Cisco Страницы: 48

ServeRAID M5014

Бренд: IBM Страницы: 106

Бренд: Panasonic Страницы: 15

Бренд: Panasonic Страницы: 42

Бренд: fakro Страницы: 16

Бренд: e-BLEACH Страницы: 24

Бренд: olympia electronics Страницы: 10

Бренд: Hattersley Страницы: 2

Бренд: National Instruments Страницы: 6

Controller CR100

Бренд: Sonos Страницы: 2

Бренд: EOS Страницы: 7

Бренд: jablotron Страницы: 2

Бренд: HIMA Страницы: 40

Бренд: Samson Страницы: 44

Бренд: Beckhoff Страницы: 47

Бренд: DOTECH Страницы: 4

Бренд: MISUMI Страницы: 166

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды