Huawei LUNA2000-5-NHE0 Скачать руководство пользователя страница 83

Страница: 83 / 95

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting

3047

Battery

Pack

Undervol

tage

Major

1. The voltage of the

battery pack or its cell is

too low.
2. The battery pack has

been stored for a long

period of time.
3. The battery pack has

been idle for a long time

after grid connection.

1. The 3047-1 (battery pack

undervoltage protection) and

3047-2 (cell undervoltage

protection) alarms do not affect

the running of other battery

packs.
2. Connect to the power grid

and charge batteries in a timely

manner.
3. If the alarm persists after the

battery has been charged for

one hour, contact your dealer or

technical support.

3049

Inconsist

ent

Battery

Power

Control

Module

Versions

Warning 1. The versions of the

power control modules in

the parallel system are

inconsistent.
2. The update failed.

1. The version of the power

control modules in [Battery-

CabinetNo] is inconsistent with

that of other power control

modules in the parallel system

and needs to be updated.
2. If the update fails multiple

times, contact your dealer or

technical support.

3050

Inconsist

ent ESS

Versions

Warning 1. The version of the

battery power control

modules is inconsistent

with that of the battery

packs.
2. The update failed.

1. The version of the power

control modules in [Battery-

CabinetNo] is inconsistent with

that of the battery packs and

needs to be updated.
2. If the update fails multiple

times, contact your dealer or

technical support.

3051

ESS

Version

Mismatc

Major

1. The version of the

battery power control

modules does not match

that of the battery packs,

which affects the normal

operation.
2. The update failed.

1. The version of the power

control modules in [Battery-

CabinetNo] does not match that

of the battery packs and needs

to be updated.
2. If the update fails multiple

times, contact your dealer or

technical support.

LUNA2000-(5-30)-NHS0

User Manual

7 System Maintenance

Issue 06 (2022-03-01)

Содержание LUNA2000-5-NHE0
































































































Результаты поиска

Содержание LUNA2000-5-NHE0

Отзывы:

Похожие инструкции для LUNA2000-5-NHE0

Бренды по названию

Популярные бренды

Huawei LUNA2000-5-NHE0, Руководство пользователя

Результаты поиска

Содержание LUNA2000-5-NHE0

Отзывы:

Похожие инструкции для LUNA2000-5-NHE0

Бренды по названию

Популярные бренды