Huawei FusionServer Pro 2288H V5 Скачать руководство пользователя страница 49

Страница: 49 / 177

2.7.1 PCIe Cards

The PCIe card provides ease of expandability and connection.

Contact your local Huawei sales representative or use the

Intelligent Computing

Compatibility Checker

to determine the components to be used.

2.7.2 PCIe Slots

PCIe Slots

Figure 2-41

PCIe slots

I/O module 1 provides slots 1 to 3. If a dual-slot PCIe riser module is used, slot 2 is
unavailable.

I/O module 2 provides slots 4 to 6. If a dual-slot PCIe riser module is used, slot 5 is
unavailable.

I/O module 3 provides slots 7 to 8. If a single-slot PCIe riser module is used, slot 8 is
unavailable.

Observe the following rules when configuring GPU PCIe cards:

A dual-slot PCIe riser module in I/O module 1 or 2 can house only one single-slot or dual-slot PCIe
x16 GPU card in slot 1 or 4.

A three-slot PCIe riser module in I/O module 1 or 2 does not support GPU cards.

A single-slot PCIe riser module in I/O module 3 can house only one HHHL single-slot x16 GPU
card.

I/O module 3 does not support GPU cards when it is installed with a dual-slot PCIe riser module.

A maximum of two dual-slot GPU cards or three single-slot GPU cards are supported. All GPU
cards except HHHL P4 GPU cards must be installed in dedicated PCIe riser modules.

PCIe Riser Modules

PCIe riser module 1 (universal)

–

Provides PCIe slots 1 and 3 when installed in I/O module 1.

–

Provides PCIe slots 4 and 6 when installed in I/O module 2.

FusionServer Pro 2288H V5 Server
User Guide

2 Hardware Description

Issue 08 (2019-10-30)

Содержание FusionServer Pro 2288H V5


















































































































































































Результаты поиска

Содержание FusionServer Pro 2288H V5

Отзывы:

Похожие инструкции для FusionServer Pro 2288H V5

Бренды по названию

Популярные бренды

Huawei FusionServer Pro 2288H V5, Руководство пользователя

Результаты поиска

Содержание FusionServer Pro 2288H V5

Отзывы:

Похожие инструкции для FusionServer Pro 2288H V5

Бренды по названию

Популярные бренды