The password must meet the following requirements:
l
Contain 8 to 20 characters.
l
Contain at least one space or one of the following special characters:
`~!@#$%^&*()-_=+\|[{}];:'",<.>/?
l
Contain at least two types of the following characters:
Lowercase letters a to z
Uppercase letters A to Z
Digits 0 to 9
l
Cannot be the same as the user name or the user name in reverse order.
l
Contain at least two new characters when compared with the old password.
Step 7
Click
Save
.
The initial password of the iBMC is changed.
----End
7.4.3.2 Changing the Initial U-Boot Password
l
U-Boot is a kind of underlying software used to configure basic settings, for example, initialize
hardware devices and set up memory space mapping, to prepare for commissioning the OS.
l
For security purposes, change the initial password upon the first login and periodically change the
password.
l
You are advised to use a password that meets complexity requirements or to enable the password
complexity check function.
l
The password complexity check function is enabled by default.
Procedure
Step 1
Log in to the iBMC CLI.
Step 2
Restart the iBMC.
ipmcset -d reset
The command output is as follows:
This operation will reboot IPMC system. Continue? [Y/N]:
Step 3
Enter
y
.
The system restarts.
Step 4
Press
Ctrl
+
B
immediately when the following information is displayed:
Hit 'ctrl + b' to stop autoboot: 1
Step 5
Enter the default password (
Admin@9000
).
The U-Boot interface is displayed.
u-boot>
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30)
Copyright © Huawei Technologies Co., Ltd.
105
