Activity
Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Blinking at 8 Hz
The data on the secondary NVMe
drive is being rebuilt.
Steady on/Off
Steady on
The NVMe drive is faulty.
●
If the VMD function is disabled, NVMe drives support only orderly hot swap.
Table 5-11 NVMe drive indicators (VMD disabled)
Activity
Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Off
The NVMe drive cannot be detected.
Steady on
Off
The NVMe drive is working properly.
Blinking at 2 Hz
Off
Data is being read from or written
to the NVMe drive.
Off
Blinking at 2 Hz
The NVMe drive is being located or
hot-swapped.
Off
Blinking at 0.5
Hz
The hot removal process is
complete, and the NVMe drive is
removable.
Steady on/Off
Steady on
The NVMe drive is faulty.
5.5.4 RAID Controller Card
The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.
●
Contact your local Huawei sales representative or use the
to determine the components to be used.
●
For details about the RAID controller card, see
.
5.6 Network
5.6.1 FlexIO Cards
FlexIO cards provide network expansion capabilities.
●
The FlexIO card (with electrical ports) cannot be connected to power over
Ethernet (PoE) devices (such as a switch with PoE enabled). Otherwise, link
communication failure or even damage to the FlexIO card may be caused.
Huawei FusionServer Pro 1288H V5 Server
Technical White Paper
5 Hardware Description
Issue 14 (2020-09-03)
Copyright © Huawei Technologies Co., Ltd.
32