Port
Type
Quantity
Description
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
Serial port
RJ45
1
Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
Management
network port
1000BASE-T
1
Used for server management.
NOTE
The management network port is
a GE port that supports 100
Mbit/s and 1000 Mbit/s auto-
negotiation.
USB port
USB 3.0
2
Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly. The
server may operate abnormally if
an abnormal USB device is
connected.
PSU socket
-
2
Used to connect to the power
distribution unit (PDU) in the
cabinet. You can select the
number of power supply units
(PSUs) as required.
NOTE
● When determining the
quantity of PSUs, ensure that
the rated power of the PSUs
is greater than that of the
server.
● If only one PSU is used,
Predicted PSU Status cannot
be set to Active/Standby on
the iBMC WebUI.
Huawei FusionServer Pro 1288H V5 Server
Technical White Paper
5 Hardware Description
Issue 14 (2020-09-03)
Copyright © Huawei Technologies Co., Ltd.
20