Huawei ETP48400-C9A2, Руководство пользователя

Страница: 62 / 88

ETP48400-C9A2 Embedded Power
User Manual
6 Commissioning
Issue 05 (2020-04-07) Copyright © Huawei Technologies Co., Ltd. 55
 The standard protocols SNMPv1 and SNMPv2 have security risks. You are advised to use the secure
protocol SNMPv3.
 The standard encryption algorithms MD5 and DES have security risks. You are advised to use the
secure encryption algorithms SHA and AES.
Procedure
Step 1
Log in to the WebUI. For details, see 6.7.1 (Optional) Setting Parameters Before Using
WebUI .
Step 2
Access the System Settings page and set SNMP .

There are two or more NMSs and the SNMP versions have both SNMPv1 or SNMPv2c
and SNMPv3: Set
SNMP Version to ALL in SNMP , and set SNMP Port Number ,
Read Community Name , and Write Community Name . Then click Add in SNMPv3 ,
and set User Name , MD5/SHA Password , and DES/AES Password . Then click
Confirm .

SNMPv1 or SNMPv2c: Set SNMP Version to SNMPv1&SNMPv2c in SNMP , and set
SNMP Port Number , Read Community Name , and Write Community Name .

SNMPv3: Set SNMP Version to SNMPv3 in SNMP , click Add in SNMPv3 , and set
User Name , MD5/SHA Password , and DES/AES Password . Then click Confirm .
Step 3
In SNMP Trap , click Add , set Trap Target Address and Trap Port and set Trap
community , and choose SNMP Version .
SNMP Version in this place can be different from the version in Step 2 .
Step 4
In Mib files , click Export to export the Mib file and then import it into the NMS.
If there is only one NMS, perform Step 4 once only.
----End
Follow-up Procedure
You can query the power system operating status, active alarms, and the names of
user-defined dry contact inputs, and configure dry contact outputs on the NMS that is
connected over SNMP.
6.8 Connecting the Battery Supply
Prerequisites