ETP48400-C9A2 Embedded Power
User Manual
6 Commissioning
Issue 05 (2020-04-07)
Copyright © Huawei Technologies Co., Ltd.
54
Main
Menu
Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Fifth-Level
Menu
Default
Value
Settings
NOTE
This
parameter is
displayed
only when
Port Mode
is
set to
Manual
.
M/S Protocol
Baud Rate
-
9600
9600
Comm. Address -
3
3
----End
6.7.3 (Optional) Setting Parameters Before Using SNMP
Prerequisites
You can set SNMP parameters remotely or locally on the WebUI.
Before setting SNMP parameters, obtain the information listed in
Table 6-9
Information obtained from the NMS
Information
Description
SNMP version
SNMP version and port number used by the SMU and NMS.
The SNMP versions include
SNMPv1
,
SNMPv2c
, and
SNMPv3
.
SNMP Port Number
Read Community Name
If you use SNMPv1 or SNMPv2c, enter the read community
name and write community name that comply with the NMS.
Otherwise, the SMU will not connect to the NMS.
The read community name must be different from the write
community name.
Write Community Name
User Name
To enhance the security, you need a user name and password
for authentication if you use SNMPv3. After the
authentication succeeds, the SMU can communicate with the
NMS.
MD5/SHA Password
DES/AES Password
Trap Target Address
IP address and port number reported in the alarm trap.
Trap Port
Trap community
If you use SNMPv1 or SNMPv2c, community name used for
reporting alarm trap packets.
